- The tile joints of my flooring, especially in the kitchen, are blackish, dirty and difficult to clean
PROTECTION OF THE JOINTS
Many floors are layed using not absorbent materials, like ceramic or porcelain gres, and this materials are generally layed with joints between the tiles of about 3 to 5 mm. Even if the puttying is made with high quality products, the surface of these joints is porous and rough and it absorbes the dirt or holds it back, so after a short time the joints are blackish, where the dirt becomes evident.
For the cleaning the recommended product is MGP 25, following specifications and used with a sponge to obtain a perfect cleaning of the joints between the tiles. After the cleaning apply FUGA
This product covers the porosity of the joints and makes the everyday-cleaning easier . Apply on the joints and allow to dry at least 24 hours.